Graphs and tables

A Approximate determination of needed heat output

A Approximate determination of needed heat output

For 1m2 surface with headroom to 3 meters and with the heat resistance of constructions complzing the termal standard.

B Heat output of the wall heating

B Heat output of the wall heating

C The ways of the walls heating

C The ways of the walls heating

D Approximate determination of the output of the floor heating surface

D Approximate determination of the output of the floor heating surface

Correction coefficient (K) of basic thermal output for different flooring and others

Keramic flooring K=1
PVC, linoleum K=0.84
Carpet, jekor K=0.75
Parquet, cork K=0.68
Laminated flooring K=0.5
Pipe ∅ 16 mm K=0.85
Pipe ∅ 20 mm  K=1.1

Note:

max. cooling output of floor surface  40 W/m2
min. allowable temperature of water for cooling floors is  17 °C (because of condensation)

E Stress versus time to Failure for 95°C

E Stress versus time to Failure for 95°C

F Charakteristic of the pump Perfecta Logic 25-8U/130

F Charakteristic of the pump Perfecta Logic 25-8U/130

G Physical and mechanical properties

G Physical and mechanical properties

H Charakteristic of the pump Perfecta Logic 25-4U/130

H Charakteristic of the pump Perfecta Logic 25-4U/130

I Temperature controller RL101

I Temperature controller RL101

J Pressure losses of pipes for medium water temp. 70°C

J Pressure losses of pipes for medium water temp. 70°C

K Pres. losses of the valves for manifolds

K Pres. losses of the valves for manifolds

L Pres. losses of the thermost. valve RL315, RL362

L Pres. losses of the thermost. valve RL315, RL362

PEX distribution - System Tichelman

PEX distribution - System Tichelman

The way of pipe laying the loop of floor heating and floor composition

The way of pipe laying the loop of floor heating and floor composition

The ways of inside house installation

The ways of inside house installation